> ## Documentation Index > Fetch the complete documentation index at: https://seilabs-docs-evm-cookbook.mintlify.site/llms.txt > Use this file to discover all available pages before exploring further. # Sei Technical Reference > Access detailed command syntax, configuration parameters, and troubleshooting procedures for node operators and validators running Sei network infrastructure. This guide is a reference for Sei node operators and validators. It gives detailed command syntax, configuration parameters, and troubleshooting procedures. For API documentation, see the API Documentation section. ## Command line interface reference The `seid` binary has extensive functionality to manage your Sei node. Understanding these commands is essential for effective node operation and troubleshooting. ### Node management commands These commands help you control and monitor your node: If you see an error such as `panic: recovered: runtime error: integer divide by zero`, it means that you cannot start nodes directly from the genesis file. Instead, sync to the block tip with [state sync](/node/statesync) or a [snapshot](/node/snapshot). ```bash theme={null} # Start the node seid start [flags] # Show node status seid status # Show validator consensus key seid tendermint show-validator # Query node information seid query node info ``` #### Freeze mode (`--freeze-height`) As of v6.6.3, you can put a full node into read-only freeze mode at a specified block height. Use the `--freeze-height` start flag or the corresponding `freeze-height` field in `app.toml`. Freeze mode exists for historical RPC nodes. A node frozen at an upgrade height keeps running the pre-upgrade binary and keeps serving the state that binary produced. It does not shut down at the boundary or execute the upgrade block with code that no longer matches that state. Query RPC remains available, so the node can continue to serve reads, but write and network paths are disabled from startup: * Transaction and evidence submission is rejected. The `BroadcastTx`, `BroadcastTxAsync`, `BroadcastTxSync`, `BroadcastTxCommit`, and `BroadcastEvidence` RPC calls all return `ErrReadOnly` (`RPC writes are disabled in freeze mode`). The EVM endpoint submits transactions through the same path, so `eth_sendRawTransaction` fails with the same error. * Mempool gossip is disabled. The mempool reactor does not start, and the node does not advertise the mempool p2p channel to peers. * State sync is disabled. If it is enabled in `config.toml`, the node logs a notice and falls back to block sync. Block sync and consensus stop before they execute the configured height and do not advance beyond it. The node must not have reached the freeze height yet. If the application, block store, or state store height is already at or above `freeze-height`, startup fails with ` height has already reached freeze height `. To build a frozen node, start from a data directory that is below the freeze height. This can be a fresh sync from genesis or a [snapshot](/node/snapshot) taken below that height. Then let block sync stop at the boundary. ```bash theme={null} # Start a full node in read-only freeze mode at a given block height seid start --freeze-height ``` You can configure the same behavior persistently with the `freeze-height` field. Its value is the first block height that a full node must not execute. A value of `0` disables freeze mode. The key is a top-level entry in `app.toml`, in the base configuration next to `halt-height`, not under any `[section]` header. The generated [default `app.toml`](/node/node-operators#default-configurations) shows the field in context. ```toml theme={null} # app.toml — top-level key in the base configuration (next to halt-height), not under any [section] freeze-height = 0 ``` Freeze mode is supported only for full nodes. In validator or seed mode, the node rejects a non-zero `freeze-height` at startup with an error (`freeze height is not supported in mode`). You also cannot combine `freeze-height` with `halt-height`, `halt-time`, or the `--grpc-only` start flag. The node rejects each combination at startup. ### Frozen RPC router The `frozen-rpc-router` binary, available as of v6.6.3, is a companion to freeze mode. It exposes a single HTTP EVM JSON-RPC endpoint that transparently proxies requests to a live node and one or more freeze-height-frozen nodes. It routes each request to the correct backend based on the block height that the request references. With the router, a set of archival nodes can collectively serve historical state through one endpoint. Each node is frozen at a different upgrade height and runs the binary that was live for its interval. Because a freeze height is an exclusive boundary, a node started with `--freeze-height 100` serves blocks through height 99. The router therefore sends height 99 to that node. It sends height 100 to the next configured interval, or to the live node when no frozen interval covers it. The router is a standalone binary in the `sei-chain` repository. It is not part of `seid`, and `make install` does not install it. Build it from a source checkout with the `build-frozen-rpc-router` target, which writes the binary to `./build/frozen-rpc-router`: ```bash theme={null} git clone https://github.com/sei-protocol/sei-chain.git cd sei-chain git checkout # v6.6.3 or later make build-frozen-rpc-router ``` ```bash theme={null} # Route between a live node and two frozen nodes. The router takes the default EVM # HTTP RPC port (8545), so the live node and the frozen node that share this host # have been moved to 9545 and 9546. The frozen node on 10.0.0.12 runs on its own # host and keeps the default port. ./build/frozen-rpc-router \ --listen-address 127.0.0.1:8545 \ --live-node localhost:9545 \ --frozen-node 1000000=localhost:9546 \ --frozen-node 2000000=10.0.0.12:8545 ``` If you bind the router to a public interface (for example, `--listen-address 0.0.0.0:8545`), put it behind a firewall or reverse proxy. Protect it as you would a node's own EVM RPC port. The router has no authentication of its own, so anyone who can reach its listen address can query every backend behind it. The example binds to `127.0.0.1` so that only local clients can connect. The binary accepts these flags: * `--listen-address`: The address on which the router listens (default `127.0.0.1:8545`). * `--live-node`: The HTTP RPC address of the live node (required). * `--frozen-node`: A `freeze-height=ip:port` pair. Repeat it once for each frozen node. The router accepts bare `host:port` addresses and `http://` or `https://` URLs. You may list frozen nodes in any order, but each freeze height must be positive and unique. * `--max-request-body-bytes`: The maximum JSON-RPC request body size in bytes (default `5242880`, which is 5 MiB). It must be positive. The router rejects larger requests with HTTP `413`. * `--max-block-reference-depth`: The maximum nested block reference depth (default `16`). It limits how deeply nested `blockNumber` object references are parsed when the router resolves a request's block parameter. It must be positive. * `--batch-request-limit`: The maximum number of calls in a JSON-RPC batch (default `1000`). It must be positive. The router rejects a batch over this limit with JSON-RPC error `-32600` (`batch too large`). * `--write-timeout`: The maximum duration to write an HTTP response (default `30s`). It must be positive. * `--shutdown-timeout`: The graceful shutdown timeout (default `10s`). It must be positive. #### Routing rules The router inspects and routes only JSON-RPC `POST` requests. It passes every other request, including WebSocket upgrade requests, straight through to the `--live-node` address without inspection. That address is the live node's HTTP RPC endpoint, which does not accept WebSocket upgrades. Clients that need subscriptions should therefore connect directly to the live node's WebSocket port (`8546` by default), not through the router. * `eth_*` and `debug_*` methods that take an explicit block number or the `earliest` tag are routed to the interval that contains that height. Examples include `eth_getBlockByNumber`, `eth_getBalance`, `eth_call`, `eth_getStorageAt`, and `debug_traceBlockByNumber`. `earliest` resolves to height 0. * `eth_getLogs` and `eth_feeHistory` are routed only when their entire block range falls within a single interval. The range is explicit for `eth_getLogs`. For `eth_feeHistory`, the router derives it from `blockCount` and `newestBlock` (`newestBlock - blockCount + 1` through `newestBlock`, clamped at `0`). The router rejects a range that crosses an interval boundary with JSON-RPC error `-32000` (`block ranges spanning multiple frozen-node intervals are not supported`). * An `eth_getLogs` filter that sets `fromBlock` but omits `toBlock` is treated as ending at `latest`. As a result, the router rejects it with the same `-32000` error whenever `fromBlock` is inside a frozen interval. To stay within one interval, set `toBlock` explicitly. The reverse works: a filter that sets only `toBlock` is routed to the interval that contains `toBlock`. * Requests with latest-style block tags (`latest`, `pending`, `safe`, `finalized`) are forwarded to the live node. So are requests that reference a block by hash, methods without a block parameter, and stateful filter methods. * Batch requests are split so that each call reaches its correct backend, then reassembled into a single response. * Calls whose backend cannot be reached return JSON-RPC error `-32001` (`upstream request failed`). #### Route header Responses proxied to a single backend carry a `Sei-RPC-Route` header. The header identifies which backend served the response: `frozen:` for the frozen node at that freeze height, or `live` for the live node. A batch split across multiple backends returns `mixed`. Router-generated errors (oversized or malformed requests, batches over the limit, block ranges that span intervals, and unreachable backends) do not carry the header. Neither does non-`POST` traffic that passes through to the live node. ### seidb tooling commands The `seidb` binary has low-level tools to inspect and maintain a node's on-disk state. #### Reporting FlatKV EVM migration status The `migrate-evm-status` subcommand reads the on-disk FlatKV EVM migration state from a FlatKV data directory and prints a JSON summary. It is intended mainly for integration and operator tooling that polls each validator to check whether the FlatKV EVM migration has completed. The tooling then needs no custom RPC handler and does not have to grep through node logs. ```bash theme={null} # Report FlatKV EVM migration status at the latest available version seidb migrate-evm-status --db-dir # The --db-dir flag may be abbreviated as -d seidb migrate-evm-status -d $HOME/.sei/data/state_commit/flatkv # Report status at a specific FlatKV version (0 selects the latest) seidb migrate-evm-status --db-dir --height ``` The command opens FlatKV read-only. It first hardlink-clones the latest snapshot and copies the WAL into a temporary directory. You can therefore run it safely against a directory that a live node is still writing to. The emitted JSON contains these fields: * `version_at`: The FlatKV version that was read. * `migration_version`: The on-disk migration version (`0` means that the FlatKV EVM migration has not completed yet). * `migrate_evm_complete`: `true` after the migration version reaches the FlatKV EVM (v1) target. * `boundary_present`: `true` while the migration is in flight (the in-progress resume cursor is still present). * `boundary_hex`: The hex-encoded migration boundary cursor. It appears only when a boundary is present. * `version_raw_hex`: The hex-encoded raw migration-version bytes. It appears only when a migration version is present. #### Comparing EVM state across backends The `evm-logical-digest` subcommand computes a backend-independent digest of the EVM logical state (the account, code, and storage buckets). With this digest, you can compare a memIAVL node and a FlatKV node at the same chain height. A freshly migrated FlatKV node stamps a per-key `blockHeight` into each value, and this stamp differs from the memIAVL leaf versions. As a result, a raw byte-for-byte digest would diverge even when the underlying EVM state is identical. This command strips the serialization-version and `blockHeight` header on both sides. It then digests only the height-independent logical payload (storage word, bytecode, or balance+nonce+codehash) and produces a comparable `FINAL_DIGEST` for each backend. ```bash theme={null} # FlatKV digest at a height (WAL-replays to it). Prints per-bucket # bucket_digest values and one FINAL_DIGEST line for backend comparison. seidb evm-logical-digest --backend flatkv \ --db-dir $HOME/.sei/data/state_commit/flatkv --height 213200000 # memIAVL digest at the same height (0 = current symlink), using the default # semantic normalization. memiavl resolves snapshot-/evm or current/evm # and does not replay WAL in this tool. seidb evm-logical-digest --backend memiavl \ --db-dir $HOME/.sei/data/state_commit/memiavl --height 213200000 # Translator-based memIAVL digest, which feeds each leaf through the current # migration mapping (flatkv.ImportTranslator). seidb evm-logical-digest --backend memiavl \ --db-dir $HOME/.sei/data/state_commit/memiavl --height 213200000 \ --memiavl-normalization translator ``` Two backends match when the FlatKV `FINAL_DIGEST` equals the memIAVL `FINAL_DIGEST`. FlatKV also writes an internal migration-version marker row, which a memiavl-only node never owns. The command automatically omits that row from the final comparison. The command accepts these flags: * `--backend`: The backend to read (`flatkv` or `memiavl`). * `--db-dir` (`-d`): For FlatKV, the FlatKV data directory. For memIAVL, the memIAVL root directory that contains `current/` and `snapshot-*`. * `--height`: The target version. FlatKV WAL-replays to it, and memIAVL resolves `snapshot-/evm` (`0` selects the `current` symlink). * `--memiavl-normalization`: The memIAVL normalization mode. Use `semantic` or `independent` for the raw EVM key-value decoder, or `translator` for the current migration mapping. The default is `semantic`. * `--inspect-bucket`: Inspect one normalized bucket (`account`, `code`, `storage`, or `legacy`) instead of printing the global digest. * `--key-offset` (inspect mode): The byte offset into the physical key, applied before `--key-prefix` or sharding. * `--key-prefix` (inspect mode): A hex prefix, relative to `--key-offset`, that filters physical keys. * `--shard-next-bytes` (inspect mode): Group matching keys by this many bytes after `--key-prefix`. * `--list` (inspect mode): List pairs of matching keys and logical values instead of shard `bucket_digest` values. * `--list-limit` (inspect mode): The maximum number of pairs to print with `--list` (default `1000`). A value `<= 0` means unlimited. * `--details` (inspect list mode): Include backend-specific version metadata. * `--find-hash`: An optional 32-byte hex per-entry hash to search for. When two `bucket_digest` values differ by exactly one entry, their XOR is the hash of that entry. This flag prints every matching entry, so you can locate a single diverging row. ### Autobahn (GigaRouter) config generation When you use the Autobahn (GigaRouter) networking layer, you can generate the Autobahn JSON config from a set of node directories. Each directory must contain `validator_pubkey.txt`, `node_pubkey.txt`, `autobahn_address.txt`, and `evmrpc_url.txt`. Unlike the key files, `evmrpc_url.txt` is not written automatically, so you must create it by hand with the node's EVM RPC URL. If the file is missing, the command fails with an error. The `mempool_size` field is no longer part of `autobahn.json`. Remove it from existing config files. ```bash theme={null} # Generate an autobahn JSON config from one or more node directories seid tendermint gen-autobahn-config [node-dirs...] --output # The --output flag may be abbreviated as -o seid tendermint gen-autobahn-config ./node0 ./node1 ./node2 -o autobahn.json # Choose where autobahn consensus and data WALs are persisted (default: data/autobahn) seid tendermint gen-autobahn-config ./node0 ./node1 --output autobahn.json --persistent-state-dir data/autobahn # Pass an empty value to disable persistence and run in-memory only seid tendermint gen-autobahn-config ./node0 ./node1 --output autobahn.json --persistent-state-dir= ``` The `--persistent-state-dir` flag controls where Autobahn persists its consensus and data write-ahead logs (WALs) across restarts. The default is `data/autobahn`, so persistence is enabled by default without any operator action. The consensus and data layers write to distinct subdirectories under this shared on-disk root. At config load time, a relative path is resolved against the node's `--home` directory, and an absolute path is used as is. An empty value (`--persistent-state-dir=`) disables persistence entirely, and both the consensus and data layers run in memory only. When set, the flag populates the `PersistentStateDir` field in the generated config. The command reads these files from each node directory: * `validator_pubkey.txt`: The validator public key in `validator:` format. * `node_pubkey.txt`: The p2p node public key in `node:ed25519:public:` format. * `autobahn_address.txt`: The network address (`host:port`) that the node advertises to peers. * `evmrpc_url.txt`: The node's EVM RPC URL. It is written into the validator's `evmrpc` field for cross-shard transaction proxying. The `validator_pubkey.txt` and `node_pubkey.txt` files are written automatically next to `priv_validator_key.json` and `node_key.json` whenever those keys are saved. They are therefore usually already present in each node's config directory. The generated `autobahn.json` file describes the validator set, transaction limits, block interval, view timeout, and dial interval. Gas limits are not part of this file and come from the genesis block parameters instead. To make a node use the file, reference it from `config.toml` with the `autobahn-config-file` key. #### Giga mode behavior and per-block limits A node starts in Giga mode when `autobahn-config-file` is set in `config.toml`. In Giga mode, the block production and networking behavior differs significantly from standard Tendermint consensus: * **The CometBFT `TxMempool` is not used.** Under Giga, the standard mempool and its gossip reactor are disabled entirely. Transactions route through the Autobahn producer-backed mempool instead. * **Consensus reactor, state sync, and block sync are disabled.** In Giga mode, the node skips the consensus and state-sync reactors entirely. The block-sync reactor still runs without a syncer. State sync and block sync are both forced off, regardless of other configuration. * **Transactions are admitted through the producer mempool.** The RPC broadcast endpoints call the producer's `InsertTx` or `TryInsertTx`, not the CometBFT mempool's `CheckTx`. `BroadcastTx` uses `InsertTx`, which blocks while the mempool is full. The async path calls `TryInsertTx` in the background and returns immediately. As a result, when the mempool is full, the transaction is silently dropped. The `mempool is full` error from `TryInsertTx` never reaches async callers. * **Sequential EVM nonce ordering is enforced.** For EVM transactions, the producer mempool admits transactions strictly in nonce order per sender. A transaction whose nonce does not match the next expected nonce is rejected with a `bad nonce` error. Because admission is sequential, the mempool can track pending nonces (`EvmNextPendingNonce`) as callers submit them. The producer enforces these limits on each Autobahn block payload as it fills a block: * **Maximum transactions per block:** The lower of the configured `max_txs_per_block` and the built-in maximum of 2,000 (see the transaction payload caps below). * **Maximum total transaction bytes per block:** A fixed per-block byte cap. A single transaction larger than this cap is rejected with a `transaction too large` error. * **Wanted gas per block (`MaxGasWantedPerBlock`):** Derived from the genesis `MaxGasWanted` block param. A transaction whose `GasWanted` exceeds this per-block limit is rejected as too large. * **Estimated gas per block (`MaxGasEstimatedPerBlock`):** Derived from the genesis `MaxGas` block param. A transaction whose (normalized) estimated gas exceeds this per-block limit is rejected as too large. The producer seals the current block and starts a new one as soon as the next transaction would exceed a limit. This rule covers the transaction-count, byte, wanted-gas, and estimated-gas limits. #### Autobahn committee and network message limits Beyond the per-block payload limits, Giga mode enforces structural limits on the validator committee and on incoming consensus network messages: * **Maximum validators per committee:** The Autobahn committee has a hard limit of 100 validators (`MaxValidators`). Committee creation rejects any validator set over this limit with a `too many validators` error. It does not silently truncate the set. * **Bounded consensus network messages.** Autobahn consensus protobuf messages carry declared size and count constraints. These constraints are checked against the raw wire bytes before the message is decoded. Payloads that violate them are rejected during decoding, before any allocation. This protects nodes from oversized or malformed inputs that could otherwise decode into much larger in-memory structures. The enforced message constraints include: * **Per-field maximum sizes** on fixed-width fields such as hashes, signatures, and public keys. * **Maximum repeated-field counts** on validator-related lists. Signature and quorum-certificate lists are capped at 100 entries, which matches the 100-validator committee cap. * **Transaction payload caps:** A block payload may carry at most 2,000 transactions. The combined transaction byte budget is exactly 2,048,000 bytes (2,000 × 1,024), and it may be split arbitrarily across the transactions in the payload. These are the built-in maxima that the per-block limits above refer to. Any message whose fields exceed these limits is rejected at decode time, so an oversized network payload never reaches the consensus logic. Giga replaces the CometBFT mempool, so Giga does not support the `unsafe_flush_mempool` RPC endpoint. The endpoint returns `unsafe_flush_mempool is not supported with autobahn mempool`. ### Key management Proper key management is critical for security. Use these commands to manage your keys: ```bash theme={null} # Create new key seid keys add [flags] # List all keys seid keys list # Delete key seid keys delete # Export key (encrypted) seid keys export # Import key seid keys import # Show key address seid keys show -a ``` ### Transaction commands These commands let you interact with Sei: ```bash theme={null} # Send tokens seid tx bank send usei [flags] # Delegate tokens seid tx staking delegate usei --from # Withdraw rewards seid tx distribution withdraw-rewards --from # Edit validator seid tx staking edit-validator [flags] --from ``` ## Configuration parameters Understanding configuration parameters is essential to optimize your node's performance and security. ### App.toml parameters The `app.toml` file controls application-specific settings: ```toml theme={null} # Minimum gas prices for transaction acceptance minimum-gas-prices = "0.02usei" # First block height a full node must not execute (read-only freeze mode). # 0 disables freeze mode. Full nodes only; see "Freeze mode" above. freeze-height = 0 # API configuration [api] enable = true swagger = true address = "tcp://0.0.0.0:1317" max-open-connections = 1000 # State sync configuration [state-sync] snapshot-interval = 1000 snapshot-keep-recent = 2 # State store configuration [state-store] ss-enable = true ss-backend = "pebbledb" ss-keep-recent = 100000 ss-prune-interval = 600 ``` ### Config.toml parameters The `config.toml` file controls the core consensus engine and networking: ```toml theme={null} # P2P Configuration [p2p] laddr = "tcp://0.0.0.0:26656" external-address = "" # bootstrap-peers holds seed/peer addresses (NodeID@host:port, comma-separated) # dialled to populate the address book via PEX. As of v6.6.2, `seid init` # auto-populates this field with the built-in Sei Labs seed nodes for # well-known public networks (pacific-1, atlantic-2). Devnets (arctic-1) and # unknown/private chains get none, and an existing bootstrap-peers value is # never overwritten. The example below reflects a fresh init on an # unrecognised chain. bootstrap-peers = "" persistent-peers = "" upnp = false max-connections = 100 max-outbound-connections = 20 max-packet-msg-payload-size = 10240 handshake-timeout = "10s" dial-timeout = "3s" # How often the node accepts a new inbound connection. A larger interval paces # the accept loop more slowly; if the kernel accept backlog outpaces it, arriving # peers wait past handshake-timeout and the node silently stops acquiring inbound # peers. In v6.6.2 this became configurable and the default accept rate rose from # ~1/s to ~100/s (a "10ms" interval). A value of 0 disables the limiter; negative # values are rejected during config validation. accept-interval = "10ms" # RPC Configuration [rpc] laddr = "tcp://0.0.0.0:26657" cors-allowed-origins = [] cors-allowed-methods = ["HEAD", "GET", "POST"] cors-allowed-headers = ["Origin", "Accept", "Content-Type", "X-Requested-With", "X-Server-Time"] max-open-connections = 900 # timeout-broadcast-tx-commit is now enforced by the BroadcastTxCommit RPC: when set # greater than 0 it is applied as a context timeout on the request, so a # BroadcastTxCommit call will be cancelled if it does not complete within this duration. timeout-broadcast-tx-commit = "10s" # Mempool Configuration [mempool] size = 5000 max-txs-bytes = 1073741824 cache-size = 10000 # ttl-duration and ttl-num-blocks now treat zero (or unset) as "TTL purging disabled". # A non-zero value defines the time / number of blocks after which a transaction # is removed from the mempool; leaving them unset or set to zero disables TTL-based # purging entirely. ttl-duration = "5s" ttl-num-blocks = 10 # Consensus Configuration [consensus] wal-file = "data/tendermint/cs.wal/wal" # Consensus timeouts are governed by on-chain ConsensusParams; the old # timeout-* keys were removed and produce a startup error if present. # Local overrides are only possible via the unsafe-*-timeout-override # keys, which take effect only when unsafe-overrides-enabled = true. double-sign-check-height = 0 ``` The `[consensus]` section may still parse a `stateless-leader-election` field, but the field is **deprecated and ignored**. Stateless (seed-based) leader election is always enabled, regardless of the value, so the field has no effect. It remains only for config-parsing compatibility, and you can safely omit it. Out-of-process ABCI support was removed. The full node now runs only with Tendermint in-process. External standalone ABCI processes (socket or gRPC) are no longer supported. As a result: * The `seid start` flags `--address` and `--transport` are **deprecated and ignored**. * The Tendermint node flags `--proxy-app` and `--abci` are **deprecated and ignored**. * The `proxy-app` and `abci` fields in `config.toml` are **deprecated and ignored**. Newly generated `config.toml` files no longer include them. If you upgrade a node and these lines are in your `config.toml`, delete them. ## Network parameters Understanding network parameters helps you operate your node effectively. ### Chain parameters These parameters define the network's behavior: ```text theme={null} Block Time: ~400ms target Max Validators: 40 Unbonding Period: 21 days Minimum Self Delegation: 1 SEI Slashing Parameters: - signed_blocks_window: 108,000 blocks - min_signed_per_window: 5% (validator must sign ≥5% of blocks in the window) - downtime_jail_duration: 10 minutes - slash_fraction_downtime: 0% (no stake slash; jail only) - slash_fraction_double_sign: 0% (no stake slash; double-signing still triggers permanent tombstoning) Oracle Parameters: - min_valid_per_window: 0% (default changed from 5% now that the Oracle Price Feeder is retired; distinct from the slashing module's min_signed_per_window above) ``` These values reflect the current on-chain parameters. For the source of truth, query them directly with `seid query staking params` and `seid query slashing params`. Per-validator settings (for example, commission rate and commission max change rate) are configured per validator and are not chain-level parameters. ## File locations Understanding the purpose and location of important files helps with maintenance and troubleshooting: ```text theme={null} $HOME/.sei/ ├── config/ │ ├── app.toml # Application configuration │ ├── client.toml # Client configuration │ ├── config.toml # Tendermint configuration │ ├── genesis.json # Chain genesis file │ ├── node_key.json # Node identity key │ ├── node_pubkey.txt # Node public key in autobahn format ("node:ed25519:public:"), written when the node key is saved │ ├── priv_validator_key.json # Validator signing key │ └── validator_pubkey.txt # Validator public key in autobahn format ("validator:"), written when the validator key is saved ├── data/ │ ├── application.db # Application state │ └── tendermint/ # Tendermint consensus DBs (new subdirectory layout) │ ├── blockstore.db # Block data │ ├── cs.wal/ # Consensus write-ahead logs │ ├── evidence.db # Evidence of misbehavior │ ├── peerstore.db # Peer store │ ├── state.db # Tendermint state │ └── tx_index.db # Transaction index └── keyring-file/ # Local key storage ``` New nodes place the Tendermint consensus databases (blockstore, state, tx\_index, evidence, peerstore, and cs.wal) under `data/tendermint/`. Existing nodes with the legacy flat layout keep these databases directly under `data/` (for example, `data/blockstore.db` and `data/cs.wal/`). These nodes continue to use the legacy paths automatically. The legacy location takes precedence when it is present, so no migration is required. This reference guide gives essential technical information for operating Sei nodes and validators. For API documentation and other detailed specifications, see the relevant sections of this documentation. This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.